Features / Description :
Polyphonic = orange display
Monophonic = purple display
Misc = Grey display

To change the colored strip click and move on the logo :
X = color Y = brightness
 
VCOs :
The unison mode is assigned to the VCO only.
17 shapes.
Up to 7 stacked waves.

SUB :
3 Modes : Classic, Ring (KB), Ring (Hz)
The MOD knob apply a Phase Distortion (PD)
or a Phase Modulation (FM).

HRMNC :
VCO and SUB common.
AMNT : Set the number of active harmonics
LIMIT : Defines the frequency above the harmonics are removed

NOISE :
The knob DNST increase density .
3 Kind of noise

VCF :
dB : 12 / 24 dB
4 variations

GATE :
Independent gate source for VCO+SUB and poly envelope

LFOs :
MODE / SPEED : selectable BPM host ratio , free BPM or Hz
LINK : The speed is driven by the selected envelope

ENVELOPE (mono) :
FREE / RUN : permit do not waiting for the entire
cycle and pick-up the current value.
RETRIG, gate source :
- Keyboard
- ARP
- CLOCK

VCF 2 :
MODE : LPF / HPF / Parametric
dB : 12 or 24 dB
Before / After : position associated to the delay.
GAIN : is only active when Parametric is selected.

DELAY :
XM : Left & Right channel cross modulation
when modulated (ratio) throught the matrix
DELAY / SPREAD : Left OR Right time shift (10 ms / 100%)

ARPEGIATOR :
If tou choose to drive the Mono Envelope 1&2 remember
they are monophonic also the LENGTH
should be <100% (range 5 to 400%)
LENGTH : up to 400% to overleap notes.

CLOCK :
A pulse generator to re-synchronize some
gate event based.

MATRIX :
7 poly busses : 7 sources, 8 destinations.
12 mono busses : 20 sources, 40 destinations.

DISTORTION :
Based on FM, allow weird and original effect.